CFC Distributors, Inc.

Performance * Price * Service

800.548.6633

Kondex Concaves

Improved Productivity

KX7 concaves improve your productivity by increasing your combine's capacity. Our MaxThresh™ and MaxRound™ box inserts feature angled threshing and separation bars to meet the crop head on. Compared to traditional concaves, these features improve harvest capacity without compromising the grain sample or rotor loss.

Greater Customization

No one knows your crops, fields, or environment quite like you, which is why KX7 concaves allow you to customize the configuration of your threshing cylinder with our MaxThresh™ and MaxRound™ box inserts. This flexibility gives you control of your harvest, while our smaller width frames give you twice as many customization options.

Precision Product

KX7 concaves are American made and robotically manufactured to exceed OEM quality standards. Our welds are individually inspected by AWS (American Welding Society) qualified welders, while visual and robotic testing ensures product consistency and dimensional tolerances are met. By heat treating KX7's MaxThresh™ and MaxRound™ bars, you'll also benefit from a longer lasting product.

Extended Wear

KX7 MaxThresh™ box inserts feature our proprietary Tungstrong™ wear coating that is metallurgically bonded to the threshing bars. Lab testing shows these concave assemblies hold a three-time improvement in wear reduction over traditional concaves.

 


Concave Set, KX7 Case-IH

KX7 Concave set for Case-IH combines for standard threshing conditions, used for Corn and Soybeans.

At half the width of most traditional concaves, KX7 concaves allow for greater customization of threshing configurations to specific field and crop conditions. The smaller design also allows for easier installation. KX7 concaves have been proven effective in various crops and conditions around the world.

Replaceable boxes in each assembly include unique angled bars that meet the crop head-on. This design not only results in a better thresh, but allows for increased air flow disruption that results in greater capacity for improved combine productivity.

Fits Case-IH combines 1680, 1688, 2188, 2377, 2388, 2577, 2588, 5088, 6088, 7088, 5130, 6130, 7130, 5140, 6140, 7140.

Set includes front lip and 6 concaves (BA1-R02), for Tough-Tresh conditions order part number 716-043.

BUY NOW

 

Concave set, KX7 for Case-IH

KX7 Concave set for Case-IH combines for Tough-Thresh conditions, used for Corn and Soybeans.

At half the width of most traditional concaves, KX7 concaves allow for greater customization of threshing configurations to specific field and crop conditions. The smaller design also allows for easier installation. KX7 concaves have been proven effective in various crops and conditions around the world.

Replaceable boxes in each assembly include unique angled bars that meet the crop head-on. This design not only results in a better thresh, but allows for increased air flow disruption that results in greater capacity for improved combine productivity.

Fits Case-IH combines 1680, 1688, 2188, 2377, 2388, 2577, 2588, 5088, 6088, 7088, 5130, 6130, 7130, 5140, 6140, 7140.

Set includes front lip, 1 Tough-thresh concave (BA1-X04), and 5 standard thresh concaves (BA1-R02).

BUY NOW

 

Concave set, KX7 for Case-IH Flagship models

KX7 Concave set for Case-IH combines for Tough-Thresh conditions, used for Corn and Soybeans.

At half the width of most traditional concaves, KX7 concaves allow for greater customization of threshing configurations to specific field and crop conditions. The smaller design also allows for easier installation. KX7 concaves have been proven effective in various crops and conditions around the world.

Replaceable boxes in each assembly include unique angled bars that meet the crop head-on. This design not only results in a better thresh, but allows for increased air flow disruption that results in greater capacity for improved combine productivity.

Fits Case-IH combines 7240, 8240, 9240.

Set includes 8 concaves (4 LH of BA1-R22, 2 RH BA1-X14 for Rows 1 & 2, and 2 RH of BA1-R12 for rows 3 & 4).

BUY NOW

 

Concave set, KX7 for John Deere

KX7 Concave set for John Deere combines for Tough-Thresh conditions, used for Corn and Soybeans.

At half the width of most traditional concaves, KX7 concaves allow for greater customization of threshing configurations to specific field and crop conditions. The smaller design also allows for easier installation. KX7 concaves have been proven effective in various crops and conditions around the world.

Replaceable boxes in each assembly include unique angled bars that meet the crop head-on. This design not only results in a better thresh, but allows for increased air flow disruption that results in greater capacity for improved combine productivity.

Fits John Deere combines 9650STS, 9660STS, 9670STS, 9750STS, 9760STS, 9770STS, 9860STS, 9870STS, S650, S660, S670, S680, S690.

Set includes front lip, 1 Tough-thresh concave (BA2-X04), and 5 standard thresh concaves (BA2-R02).

BUY NOW

 

Concave Set, KX7 for John Deere.

KX7 Concave set for John Deere combines for standard threshing conditions, used for Corn and Soybeans.

At half the width of most traditional concaves, KX7 concaves allow for greater customization of threshing configurations to specific field and crop conditions. The smaller design also allows for easier installation. KX7 concaves have been proven effective in various crops and conditions around the world.

Replaceable boxes in each assembly include unique angled bars that meet the crop head-on. This design not only results in a better thresh, but allows for increased air flow disruption that results in greater capacity for improved combine productivity.

Fits John Deere combines 9650STS, 9660STS, 9670STS, 9750STS, 9760STS, 9770STS, 9860STS, 9870STS, S650, S660, S670, S680, S690.

Set includes front lip and 6 concaves (BA2-R02), for Tough-Tresh conditions order part number 716-053.

BUY NOW

 

Concave, KX7 for JD position 1-6

KX7 Concaves for John Deere combines. This concave can be used in position 1 thru 6 for standard configuration, for Tough-Thresh configuration use part number BA2-X04 in position 1.

At half the width of most traditional concaves, KX7 concaves allow for greater customization of threshing configurations to specific field and crop conditions. The smaller design also allows for easier installation. KX7 concaves have been proven effective in various crops and conditions around the world.

Replaceable boxes in each assembly include unique angled bars that meet the crop head-on. This design not only results in a better thresh, but allows for increased air flow disruption that results in greater capacity for improved combine productivity.

Fits John Deere combines 9650STS, 9660STS, 9670STS, 9750STS, 9760STS, 9770STS, 9860STS, 9870STS, S650, S660, S670, S680, S690.

Front position concave requires the use of the BA2-L01 lip..

BUY NOW

 

VIEW ALL KONDEX KX7 HIGH PERFORMANCE PRODUCTS